|
|
Creation and analysis of electrical machines parametric models at CAD systems.
Chmelíček, Petr ; Janda, Marcel (referee) ; Kuchyňková, Hana (advisor)
Aim of this bachelor’s thesis is to demonstrate facilities of computer aided design on practical tasks. First part contains description of Autodesk Inventor, which is one of the most important modern parametric CAD systems. There is described the basics of modeling, drawing creating and analysis of design. Second part is oriented on demonstration of capabilities of Ansys Workbench, which is important system for solution of engineering problems by the finite element method. Also there is description of user interface of Ansys, analysis of electromagnetic field in asynchronous motor and description of one phase asynchronous motor. Task of last part is to create animated presentation of asynchronous motor with outer rotor in Inventor studio.
|
|
|
Control system for equipment using renewable energy sources
Novotný, Jan ; Bradáč, Zdeněk (referee) ; Benešl, Tomáš (advisor)
The work deals with design of power and control electronics for water micro source in island network. In the general part the readers are acquaints with the issue of renewable energy sources and describes commercially produced micro sources. The practical part deals with the design of its own control system and power electronics using its own control system or PLC for water micro source. The microcontrollers were used for the implementation of the control system, for which the program part was created.
|
|
|
Timig relay for Y/D automatical start
Kovář, Jaroslav ; Vondruš, Jiří (referee) ; Hejkrlík, Jan (advisor)
This project is concerned with a concept of timing circuit used for an automatic start of the asynchronous engine Y/D. By pressing the button START, is the concactor ( the relay ) activated. After injury timing delay the concactor Y drops out and simultaneously the concactor D pulls in. By pressing the button STOP, the concactor drops out. The concept of this electric circuit is quite simple, even if good hand-mindedness of a solver is required substantially. Especially in a soldering process and in scheming PCB in the computer program EAGLE.
|
|
|
Single-Phase Induction Motor Calculation
Schlesinger, Petr ; Vítek, Ondřej (referee) ; Hájek, Vítězslav (advisor)
This master’s thesis’s target is to introduce the basic findings about single-phase asynchronous motors, their derivation from three-phase motors and the basics of a computation process and a concept of a single-phase asynchronous squirrel cage motor. The inbeing of this concept and the computation is created by classical processes for three-phase motors with a low voltage, 50 Hz.
|
|
|
Braking of an induction machine
Mareček, Šimon ; Janda, Marcel (referee) ; Mach, Martin (advisor)
The work is focused on the braking of an induction engine and the risks associated with it. In the first part, there are readers acquainted with the technical parameters of the induction engine, which is used for simulations. The second part focuses on the simulation program Ansys Maxwell and the finite element method. In the third part, there are readers introduced to a general description of the induction machine. The fourth part consists of countercurrent braking. The penultimate part is devoted to dynamic braking. The last part contains a brief introduction to generator braking. The chapters focused on braking are supplemented by simulated waveforms.
|
|
|
Shaded-Pole Induction motor
Žuška, Martin ; Koláčný, Josef (referee) ; Hájek, Vítězslav (advisor)
Single-phase shade-pole motor has easy structure, and i tis chlap. It can be used as a drive of electrical fans, drive of small household appliancesor as a gramophonic motor. Motor is rotating one way only. Direction of roteting is given by positron of shading ring. Motor is not very effective, and i tis not efficient.
|
|
| |
|
|
Calculation of optimum slip frequency of induction motor for minimisation of its losses
Bednařík, Václav ; Patočka, Miroslav (referee) ; Vorel, Pavel (advisor)
This master’s thesis focuses on the minimisation of losses by calculation of optimum slip frequency of induction motor. The next point of this master‘s thesis is supersaturation. Supersaturation must be solved for the size of losses, because of the effect that is cause of the losses, when current increases with saturation. However current is not increase proportionally with increasing saturation, but increases several times more. This problem is included in the calculation of the slip frequency. Optimum of slip frequency is solve for modified gamma model of induction machine. In the main point of this thesis is outlined the process, how the optimum can be found. With same process were already were found the equations, but they were too extensit. In the end is solved the optimum of slip frequency be minimum of the flux density.
|
|
|
Garage door drive with idnuction machine
Lažek, Tomáš ; Cipín, Radoslav (referee) ; Pazdera, Ivo (advisor)
This thesis deals with a design of an electrical drive for a sliding side door. Goal of the thesis is to design of a frequency converter for an asynchronous motor with a gearbox. In the first part, the power supply for the freqency converter is solved in form of a single phase rectifier. Power section is solved by an integrated module IKC10H60GA manofactured by Infineon. The control board is provided with circuits for communication between the processor and the power section. Auxiliary power supply is designed as a fly - back converter. The drive of the converter is realized by STM32 Nucleo - 64 board. The design of the converter and drive algorithm are described in detail.
|
|
| |
guest ::
